The reducer is actually a gear rotating machine enclosed in a steel material, and the noise of the reducer is generally due to these four conditions:


First, the gears of the reducer have been damaged to a high degree, resulting in a lot of wear and vibration between the gears, which leads to a lot of noise during the working process, and also affects its normal working efficiency.


The second is that certain problems occurred during the installation process of the reducer, which caused the position of the reducer to be unstable. During the operation, the position of the reducer was unstable and wobbled, resulting in noise.





The third is the internal mechanical failure of the reducer. It should be known that damage or shortage of a certain part of the reducer will inevitably affect the overall use, and part of the overall effect is the same reason, so noise will occur.


The last is the improper use of the reducer. Mechanical equipment such as the reducer must be used by professional technicians. If it is used incorrectly, the excessive load and speed will cause noise, which will inevitably shorten the deceleration in the long run. The service life of the machine.