Cylindrical gear reducer needs to be installed on the horizontal surface inclination shall not exceed 10 °, if the inclination is greater than 10 ° due to special needs, please contact our company before use in order to discuss matters together. So do you know what are the installation methods of cylindrical gear reducer?





The installation method of cylindrical gear reducer is as follows.
1、The installation screws should be checked from time to time to see if they are tightened and fixed securely, and the shims should be spring shims as far as possible.
2, the input shaft and output shaft and power and supporting machinery coupling, such as coupling, the requirements of the shaft and shaft strictly in the center, there should not be different center phenomenon, the use of v-belt and chain should not be too tight or too loose.
3, the installation base should be solid and reliable, no vibration, loose phenomenon, fixing screws should be strictly in accordance with the relevant standards, regulations selected.
4, cylindrical gear reducer generally needs to be installed on the horizontal surface inclination shall not exceed 10 °.


Cylindrical gear reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, printing and dyeing, pharmaceutical and other fields. When we all install the cylindrical gear reducer, we should follow the above installation method to install and use our reducer.